Usage recommendation
- Sun protection
- Venetian blind/shutter
Product highlights
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Threshold values can be adjusted for each channel
Setting the threshold values possible directly on the device
Integrated transmission pilot lights
Automatic mode can be activated/deactivated simultaneously for individual channels or all channels on the operating device directly
Rear labelling field
Defined drive commands possible
General product data
Designation
Centronic SunWindControl SWC245-II
Sales unit
pc.
Series
Transmitter
Item number
4033 000 213 0
RRP (incl. VAT)
218,00 €
GTIN
4251852908082
Technical data
Weight
0.142 kg
Colour
White
Length
123 mm
Battery type
CR 2430
Power supply (AC/DC)
DC
Dimensions
B x H x T: 39 x 123 x 21 mm
Touch mode
Wall bracket included
Type of mounting
Hand-held device
IP degree of protection
20
Number of channels
5
Width
39 mm
Intermediate positions
Dependent upon receiver
Height/depth
21 mm
Mains frequency
0 Hz
Can be integrated into the switch frame
no
Rated voltage
3 V
Dimensional drawing
Communication
Radio frequency
868,3 MHz
Additional features
Intermediate positions
Dependent upon receiver
Sensor functions
Sensor values - threshold settings
Wind
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
System does not extend manually.
Remedy:
Required system does not extend.
Remedy:
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
System does not extend manually.
Remedy:
- Wind threshold value exceeded. Wait for the wind to die down.
____________________________________________
Required system does not extend.
Remedy:
- Select correct channel.
____________________________________________
This may also interest you!