Usage recommendation
- Sun protection
- Venetian blind/shutter
Product highlights
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Threshold values can be adjusted for each channel
Setting the threshold values possible directly on the device
Integrated transmission pilot lights
Automatic mode can be activated/deactivated simultaneously for individual channels or all channels on the operating device directly
Rear labelling field
Defined drive commands possible
General product data
GTIN
4251852908099
Sales unit
pc.
Item number
4033 000 213 1
Designation
Centronic SunWindControl SWC245-II
RRP (incl. VAT)
218,00 €
Series
Transmitter
Technical data
Can be integrated into the switch frame
no
Wall bracket included
Weight
0.142 kg
Width
39 mm
Number of channels
5
Type of mounting
Hand-held device
Battery type
CR 2430
Touch mode
Intermediate positions
Dependent upon receiver
Length
123 mm
Dimensions
B x H x T: 39 x 123 x 21 mm
Colour
Black
Power supply (AC/DC)
DC
Height/depth
21 mm
IP degree of protection
20
Mains frequency
0 Hz
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Sensor functions
Sensor values - threshold settings
Wind
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
System does not extend manually.
Remedy:
Required system does not extend.
Remedy:
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
System does not extend manually.
Remedy:
- Wind threshold value exceeded. Wait for the wind to die down.
____________________________________________
Required system does not extend.
Remedy:
- Select correct channel.
____________________________________________