Usage recommendation
- Venetian blind/shutter
- Sun protection
Product highlights
Enables the programming of two intermediate positions
Single, group or central control unit
Setting the threshold values possible directly on the device
Integrated transmission pilot lights
Rear labelling field
Defined drive commands possible
General product data
Series
Transmitter
Designation
Centronic SunWindControl SWC241-II
Item number
4033 000 201 1
GTIN
4251852908006
Sales unit
pc.
RRP (incl. VAT)
144,00 €
Technical data
Weight
0.148 kg
Dimensions
B x H x T: 39 x 123 x 21 mm
Length
123 mm
Type of mounting
Hand-held device
Power supply (AC/DC)
DC
Number of channels
1
Touch mode
Mains frequency
0 Hz
Width
39 mm
IP degree of protection
20
Wall bracket included
Can be integrated into the switch frame
no
Colour
Black
Intermediate positions
Dependent upon receiver
Battery type
CR 2430
Height/depth
21 mm
Rated voltage
3 V
Additional features
Intermediate positions
Dependent upon receiver
Sensor functions
Sensor values - threshold settings
Wind
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
System does not extend manually.
Remedy:
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
System does not extend manually.
Remedy:
- Wind threshold value exceeded. Wait for the wind to die down.
____________________________________________