Usage recommendation
- Venetian blind/shutter
- Sun protection
Product highlights
Enables the programming of two intermediate positions
Single, group or central control unit
Setting the threshold values possible directly on the device
Integrated transmission pilot lights
Rear labelling field
Defined drive commands possible
General product data
Designation
Centronic SunWindControl SWC241-II
GTIN
4251852907993
Item number
4033 000 201 0
Sales unit
pc.
Series
Transmitter
RRP (incl. VAT)
144,00 €
Technical data
Width
39 mm
Wall bracket included
Colour
White
Intermediate positions
Dependent upon receiver
Dimensions
B x H x T: 39 x 123 x 21 mm
Touch mode
Number of channels
1
Length
123 mm
Weight
0.148 kg
Type of mounting
Hand-held device
Height/depth
21 mm
IP degree of protection
20
Battery type
CR 2430
Can be integrated into the switch frame
no
Mains frequency
0 Hz
Power supply (AC/DC)
DC
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Sensor functions
Sensor values - threshold settings
Wind
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
System does not extend manually.
Remedy:
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
System does not extend manually.
Remedy:
- Wind threshold value exceeded. Wait for the wind to die down.
____________________________________________
This may also interest you!