Usage recommendation
- Venetian blind/shutter
- Sun protection
Product highlights
Enables the programming of two intermediate positions
Single, group or central control unit
Setting the threshold values possible directly on the device
Integrated transmission pilot lights
Rear labelling field
Defined drive commands possible
General product data
GTIN
4251852907993
Sales unit
pc.
Series
Transmitter
RRP (incl. VAT)
144,00 €
Item number
4033 000 201 0
Designation
Centronic SunWindControl SWC241-II
Technical data
Mains frequency
0 Hz
Battery type
CR 2430
Can be integrated into the switch frame
no
Colour
White
Length
123 mm
Weight
0.148 kg
Touch mode
Wall bracket included
Dimensions
B x H x T: 39 x 123 x 21 mm
Width
39 mm
Number of channels
1
Power supply (AC/DC)
DC
Intermediate positions
Dependent upon receiver
Type of mounting
Hand-held device
Height/depth
21 mm
IP degree of protection
20
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Sensor functions
Sensor values - threshold settings
Wind
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
System does not extend manually.
Remedy:
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
System does not extend manually.
Remedy:
- Wind threshold value exceeded. Wait for the wind to die down.
____________________________________________
This may also interest you!