Usage recommendation
- Sun protection
- Roller shutter
Product highlights
Single, group or central control unit
Timers and sun protection controls can be integrated upstream
Allows Centronic radio products to be operated via wired control units from other manufacturers
Integrated transmission pilot lights
Defined drive commands possible
General product data
Sales unit
pc.
Designation
Centronic VarioControl VC421-II
Item number
4034 000 237 0
RRP (incl. VAT)
200,00 €
GTIN
4251852916469
Series
Transmitter
Technical data
Touch mode
Power supply (AC/DC)
Alternating current
Length
47 mm
An external switch/pushbutton can be connected
Type of mounting
Flush mounted
Colour
Grey
Can be integrated into the switch frame
no
Height/depth
28 mm
Dimensions
B x H x T: 40 x 47 x 28 mm
Mains frequency
50/60 Hz
Weight
0.083 kg
Intermediate positions
Dependent upon receiver
Width
40 mm
Number of channels
1
IP degree of protection
20
Rated voltage
230 - 240 V
Dimensional drawing
![Dimensional drawing](https://produktcenter.becker-antriebe.com/out/media/BAPIM001/Pixelboxx/VC421.jpg)
Communication
Radio frequency
868,3 MHz
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Drive not functioning, transmission pilot light lights up.
Remedy:
Drive not functioning, transmission pilot light remains off.
Remedy:
Drive is running in the wrong direction.
Remedy:
Drive not functioning, transmission pilot light lights up.
Remedy:
- Reduce distance from receiver.
- Program transmitter.
____________________________________________
Drive not functioning, transmission pilot light remains off.
Remedy:
- Check connection
____________________________________________
Drive is running in the wrong direction.
Remedy:
- Swap the UP and DOWN wires on the flush-mounted radio transmitter.
____________________________________________