Usage recommendation
- Sun protection
- Roller shutter
Product highlights
Single, group or central control unit
Timers and sun protection controls can be integrated upstream
Allows Centronic radio products to be operated via wired control units from other manufacturers
Integrated transmission pilot lights
Defined drive commands possible
General product data
Series
Transmitter
Designation
Centronic VarioControl VC421-II
Item number
4034 000 237 0
GTIN
4251852916469
Sales unit
pc.
RRP (incl. VAT)
200,00 €
Technical data
Weight
0.083 kg
Dimensions
B x H x T: 40 x 47 x 28 mm
Length
47 mm
Type of mounting
Flush mounted
Power supply (AC/DC)
Alternating current
Number of channels
1
Touch mode
An external switch/pushbutton can be connected
Mains frequency
50/60 Hz
Width
40 mm
IP degree of protection
20
Can be integrated into the switch frame
no
Colour
Grey
Intermediate positions
Dependent upon receiver
Height/depth
28 mm
Rated voltage
230 - 240 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Drive not functioning, transmission pilot light lights up.
Remedy:
Drive not functioning, transmission pilot light remains off.
Remedy:
Drive is running in the wrong direction.
Remedy:
Drive not functioning, transmission pilot light lights up.
Remedy:
- Reduce distance from receiver.
- Program transmitter.
____________________________________________
Drive not functioning, transmission pilot light remains off.
Remedy:
- Check connection
____________________________________________
Drive is running in the wrong direction.
Remedy:
- Swap the UP and DOWN wires on the flush-mounted radio transmitter.
____________________________________________