Usage recommendation
- Sun protection
- Roller shutter
Product highlights
Single, group or central control unit
Timers and sun protection controls can be integrated upstream
Allows Centronic radio products to be operated via wired control units from other manufacturers
Integrated transmission pilot lights
Defined drive commands possible
General product data
Sales unit
pc.
Item number
4034 000 237 0
Series
Transmitter
RRP (incl. VAT)
200,00 €
GTIN
4251852916469
Designation
Centronic VarioControl VC421-II
Technical data
An external switch/pushbutton can be connected
Power supply (AC/DC)
Alternating current
Touch mode
Dimensions
B x H x T: 40 x 47 x 28 mm
Number of channels
1
Colour
Grey
Width
40 mm
Can be integrated into the switch frame
no
Type of mounting
Flush mounted
IP degree of protection
20
Intermediate positions
Dependent upon receiver
Length
47 mm
Weight
0.083 kg
Height/depth
28 mm
Mains frequency
50/60 Hz
Rated voltage
230 - 240 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Drive not functioning, transmission pilot light lights up.
Remedy:
Drive not functioning, transmission pilot light remains off.
Remedy:
Drive is running in the wrong direction.
Remedy:
Drive not functioning, transmission pilot light lights up.
Remedy:
- Reduce distance from receiver.
- Program transmitter.
____________________________________________
Drive not functioning, transmission pilot light remains off.
Remedy:
- Check connection
____________________________________________
Drive is running in the wrong direction.
Remedy:
- Swap the UP and DOWN wires on the flush-mounted radio transmitter.
____________________________________________