To Becker websiteUsage recommendation
Roller shutter
Integration into Becker CentralControl possible
Two intermediate positions can be programmed
Two memory switching times with daily repetition programmable
Compact design ideal for mounting in the shutter box
Defined drive commands possible
Can be programmed to recognise up to 16 Centronic transmitters
General product data
Sales unit
pc.
Item number
4034 000 012 0
Series
Receiver
RRP (incl. VAT)
228,00 €
GTIN
4251852907849
Designation
Centronic VarioControl VC320
Technical data
Power supply (AC/DC)
Alternating current
Dimensions
B x H x T: 50 x 105 x 22 mm
Switching current max.
µ 5A / 230V / AC cos Φ = 1
Number of channels
1
Colour
Grey
Width
50 mm
Can be integrated into the switch frame
no
Type of mounting
In roller shutter/awning box
IP degree of protection
42
Intermediate positions
2
Length
105 mm
Weight
0.4211 kg
Height/depth
22 mm
Mains frequency
50 Hz
Rated voltage
230 V
Dimensional drawing
Additional features
Intermediate positions
2
Time function
Memory
Time function
Time function
Memory
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Drive is not functioning.
Remedy:
Drive is running in the wrong direction.
Remedy:
The radio receiver does not perform manual drive commands.
Remedy:
Switching times cannot be set on receiver.
Remedy:
Drive is not functioning.
Remedy:
- Check the electrical connection.
____________________________________________
Drive is running in the wrong direction.
Remedy:
- Swap the drive wires for OPEN and CLOSE.
- Change the direction of rotation via the master transmitter.
____________________________________________
The radio receiver does not perform manual drive commands.
Remedy:
- Program transmitter.
Problem:
The radio receiver does not perform automatic drive commands.
Remedy:
The radio receiver does not perform automatic drive commands.
Remedy:
- Program transmitter.
- Set the transmitter's slide switch to Automatic mode. If it is already at AUTO, it will need to be switched to MANUAL and then back to AUTO.
____________________________________________
Switching times cannot be set on receiver.
Remedy:
- Use transmitter with Manual/Auto slide switch.
Set switching times change.
Remedy:
Remedy:
- Frequent 230 V AC power cuts. Fluctuations in the 50 Hz mains frequency.
Use a "TimeControl" transmitter and adjust the desired switching time there.
____________________________________________