To Becker websiteUsage recommendation
- Venetian blind/shutter
- Sun protection
As a follow-up/alternative item for this product we recommend:
Integration into Becker CentralControl possible
Two intermediate positions can be programmed
Blind mode: Two intermediate positions or one intermediate position with tilt can be programmed
Blind mode: Exact adjustment of slat angle possible
Setting the threshold values possible via a programmed operating device
Two memory switching times with daily repetition programmable
Direction of rotation can be adjusted on the device directly
Suitable for outdoor installation
Standardised Hirschmann plug connection
Defined drive commands possible
Can be programmed to recognise up to 16 Centronic transmitters
General product data
Designation
Centronic VarioControl VC470-II
GTIN
4251852907924
Item number
4034 000 212 0
Sales unit
pc.
Series
Receiver
RRP (incl. VAT)
193,00 €
Technical data
Width
33 mm
Colour
Black
Intermediate positions
2
Dimensions
B x H x T: 33 x 130 x 32 mm
Touch mode
Switching current max.
µ 5A / 230V / AC cos Φ = 1
Number of channels
1
Length
130 mm
Weight
0.207 kg
Type of mounting
- on awning profile
- Surface mounted
- In roller shutter/awning box
Height/depth
32 mm
IP degree of protection
54
Can be integrated into the switch frame
no
Mains frequency
50 Hz
Power supply (AC/DC)
Alternating current
Rated voltage
230 V
Dimensional drawing
Additional features
Intermediate positions
2
Time function
Memory
Sensor functions
Sensor values - evaluable
- Wind
- Sun
- Rain
Time function
Time function
Memory
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Drive is not functioning.
Remedy:
Drive is running in the wrong direction.
Remedy:
The radio receiver does not perform manual drive commands.
Remedy:
Intermediate positions 1 or 2 cannot be programmed.
Remedy:
The shading solution retracts without a manual or automatic drive command.
Remedy:
Drive is not functioning.
Remedy:
- Check the electrical connection.
____________________________________________
Drive is running in the wrong direction.
Remedy:
- Use the direction switch to correct the running direction.
____________________________________________
The radio receiver does not perform manual drive commands.
Remedy:
- Program transmitter.
Problem:
The radio receiver does not perform automatic drive commands.
Remedy:
The radio receiver does not perform automatic drive commands.
Remedy:
- Program transmitter.
- Set the transmitter's slide switch to Automatic mode. If it is already at AUTO, it will need to be switched to MANUAL and then back to AUTO.
____________________________________________
Intermediate positions 1 or 2 cannot be programmed.
Remedy:
- Delete intermediate positions 1 or 2 and reprogram.
____________________________________________
The shading solution retracts without a manual or automatic drive command.
Remedy:
- Check the radio communication between the sensor and receiver.
- You can extend the shading solution for one hour in dead-man mode.
____________________________________________