Usage recommendation
- Sun protection
- Roller shutter
Product highlights
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Channels can be controlled independently from one another
Integrated transmission pilot lights
Rear labelling field
Defined drive commands possible
General product data
Designation
Centronic EasyControl EC545-II
RRP (incl. VAT)
139,00 €
GTIN
4251852908204
Item number
4034 000 202 1
Sales unit
pc.
Series
Transmitter
Technical data
Can be integrated into the switch frame
no
Number of channels
5
Dimensions
B x H x T: 39 x 123 x 21 mm
Length
123 mm
Type of mounting
Hand-held device
IP degree of protection
20
Colour
Black
Power supply (AC/DC)
DC
Height/depth
21 mm
Weight
0.145 kg
Mains frequency
0 Hz
Intermediate positions
Dependent upon receiver
Touch mode
Width
39 mm
Wall bracket included
Battery type
CR 2430
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Required drive is not functioning.
Remedy:
Select correct channel.
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Required drive is not functioning.
Remedy:
Select correct channel.
____________________________________________