To Becker websiteUsage recommendation
- Sun protection
- Roller shutter
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Channels can be controlled independently from one another
Integrated transmission pilot lights
Easy-to-read 10-channel display with 3-colour LEDs
Rear labelling field
Defined drive commands possible
General product data
Series
Transmitter
Designation
Centronic EasyControl EC5410-II
Item number
4034 000 203 0
GTIN
4251852908211
Sales unit
pc.
RRP (incl. VAT)
157,00 €
Technical data
Weight
0.142 kg
Dimensions
B x H x T: 39 x 123 x 21 mm
Length
123 mm
Type of mounting
Hand-held device
Power supply (AC/DC)
DC
Number of channels
10
Touch mode
Mains frequency
0 Hz
Width
39 mm
IP degree of protection
20
Wall bracket included
Can be integrated into the switch frame
no
Colour
White
Intermediate positions
Dependent upon receiver
Battery type
CR 2430
Height/depth
21 mm
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Required drive is not functioning.
Remedy:
Select correct channel.
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Required drive is not functioning.
Remedy:
Select correct channel.
____________________________________________