To Becker websiteUsage recommendation
- Roller shutter
- Sun protection
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Channels can be controlled independently from one another
Integrated transmission pilot lights
Rear labelling field
Defined drive commands possible
General product data
RRP (incl. VAT)
139,00 €
Series
Transmitter
Sales unit
pc.
GTIN
4251852908198
Item number
4034 000 202 0
Designation
Centronic EasyControl EC545-II
Technical data
Dimensions
B x H x T: 39 x 123 x 21 mm
Weight
0.143 kg
Type of mounting
Hand-held device
Width
39 mm
Intermediate positions
Dependent upon receiver
Wall bracket included
Number of channels
5
IP degree of protection
20
Battery type
CR 2430
Height/depth
21 mm
Power supply (AC/DC)
DC
Mains frequency
0 Hz
Touch mode
Length
123 mm
Colour
White
Can be integrated into the switch frame
no
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Required drive is not functioning.
Remedy:
Select correct channel.
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Required drive is not functioning.
Remedy:
Select correct channel.
____________________________________________