To Becker websiteUsage recommendation
Roller shutter
Certifications
... For the user:
Made in Germany - for maximum reliability and durability
... For installation:
Setting limit positions: Automatic detection with existing stops
... For planning:
Mounting exclusively with fixed shaft connectors
“Short” drive for narrow roller shutter applications
Mechanical limit switching
General product data
RRP (incl. VAT)
229,00 €
Series
M17
GTIN
4251852901892
Sales unit
pc.
Item number
2010 110 043 0
Drive diameter
Ø 45mm = R
Designation
R4-17-M17
Technical data
IP degree of protection
44
Power supply (AC/DC)
Alternating current
Rated current
0.4 A
Speed (load)
14 U/min
Duty cycle
S2 4 min
Rated voltage
230 V
Weight
1.606 kg
Power consump.
85 W
Mains frequency
50 Hz
Colour
White (RAL 9016)
Drive torque (Nm)
4 Nm
Speed (rpm)
17 U/min
Cable type
Rubber - S05RN-F4G0.75 - white
Cable length
3 m
Dimensions
Dimension L1
328.5 mm
Dimension L2
345.5 mm
Dimension L3
362.5 mm
Dimension L4
17 mm
Dimension L5
17 mm
Dimension Ø c
45 mm
Dimensional drawing
Drive adapter width from Drive adapter Rolm60 (4930 300 044 0), when selecting a different drive adapter, the dimensions L2, L3 and L5 will change
Special features
Assembly only with fixed shaft connectors
Motor head can be overwrapped
Additional features
Drive can be operated by wired operator control
Assembly and operating instructions
Miscellaneous
Problem:
Tubular drive does not run in the right direction.
Remedy:
limit positions.
Stops have broken off or one or several attachments are broken. Repair system; delete limit positions,
re-program limit positions
Tubular drive does not run in the right direction.
Remedy:
Tubular drive does not run in the right direction.
Remedy:
- Tubular drive is overheated. The tubular drive is operational again after a few minutes.
- Tubular drive is faulty (does not run even after standing still for a long period of time). Replace the tubular drive.
- Clear and remove the obstruction and switch in the desired direction. Check the electrical connection.
____________________________________________
limit positions.
____________________________________________
Stops have broken off or one or several attachments are broken. Repair system; delete limit positions,
re-program limit positions
____________________________________________
Tubular drive does not run in the right direction.
Remedy:
- Tubular drive is overheated. The tubular drive is operational again after a few minutes.
- Tubular drive is faulty (does not run even after standing still for a long period of time). Replace the tubular drive.
- Clear and remove the obstruction and switch in the desired direction. Check the electrical connection.
____________________________________________