To Becker websiteUsage recommendation
- Guided
- Projection screen
- Roller shutter
Certifications
... For the user:
Soft upper stop – optimum adaptation of closing forces for fabric protection
Sensitive obstacle detection in down direction for optimum protection of the application and the obstacle
Ultra-quiet operation thanks to Evolution technology (brushless DC technology)
Automatic increase of the pressing force with anti-lifting devices
Upper anti-freeze mechanism with automatic shading solution length adjustment (can be additionally activated)
Particularly smooth-running motor technology which is gentle on the system
Dynamic torque adjustment to accommodate changes in the roller shutter element
Fly screen protection function
Range of programmable driving profiles
Made in Germany - for maximum reliability and durability
Blockage detection in the UP direction (anti-freeze mechanism)
... For installation:
Automatic detection of the limit positions when flexible suspension springs or rigid shaft connectors are used
Limit positions status indicator (LSI) signals missing limit positions
Intelligent installation management permits limit position corrections
Limit position adjustment: Automatic detection when stop or fixed point end-positions are present
Automatic shading solution length adjustment
... For planning:
Electronic limit switching
C-Plug pluggable connecting cable
Supports parallel connection
General product data
RRP (incl. VAT)
292,00 €
Sales unit
pc.
Item number
1010 120 002 0
Designation
R12-17-EVO 20 R
Series
EVO 20 R
Drive diameter
Ø 45mm = R
GTIN
4251852902851
Technical data
Power consump.
50 W
IP degree of protection
44
Duty cycle
S2 4 min
Speed (load)
14 U/min
Power supply (AC/DC)
Alternating current
Mains frequency
50 Hz
Rated voltage
230 V
Weight
1.683 kg
Rated current
0.35 A
Drive torque (Nm)
12 Nm
Speed (rpm)
17 U/min
Cable type
plug-in
Dimensions
Dimension L1
493.5 mm
Dimension L2
533.5 mm
Dimension L3
549.5 mm
Dimension L4
16 mm
Dimension L5
40 mm
Dimensional drawing
Drive adapter width from Drive adapter S60L (4930 300 466 0), when selecting a different drive adapter, the dimensions L2, L3 and L5 will change
Special features
Suitable for connection in parallel
Motor head can be overwrapped
Obstacle detection
Blockage detection in both directions
Limit position programming
Intelligent installation management (3x approach)
Automatic detection of anti-lifting devices
LSI - limit positions status indicator
Fly screen and freeze protection function
Fly screen protection function
140° - can be activated/deactivated
Upper limit position anti-freeze mechanism/shading solution length adjustment
Travel specified - can be activated/deactivated
Upper limit position anti-freeze mechanism/shading solution length adjustment - factory default
Additional features
Soft stop upper limit position
Adjustable speed and travel
Individually adjustable speeds for opening and closing movement
Range of programmable driving profiles
Drive can be operated by wired operator control
Assembly and operating instructions
Miscellaneous
Problem:
Tubular drive overruns the limit position or stops short of the set limit position.
Remedy:
Tubular drive does not run in the right direction.
Remedy:
limit positions.
Problem:
During the programming run, the drive stops short of the limit position to be programmed.
Remedy:
Problem:
Ventilation slots of the roller shutter do not close fully.
Remedy:
Problem:
When opening, the drive stops short of the programmed limit position.
Remedy:
Tubular drive overruns the limit position or stops short of the set limit position.
Remedy:
- Check electrical installation, remove external devices, delete limit positions and then reset limit positions.
- Repair electrical installation and re-program limit positions.
- Stops have broken off or one or several attachments are broken. Repair system; reset tubular drive, then re-program limit positions.
____________________________________________
____________________________________________
Tubular drive does not run in the right direction.
Remedy:
- Tubular drive is overheated. The tubular drive is operational again after a few minutes.
- Tubular drive is faulty (does not run even after standing still for a long period of time). Replace the tubular drive.
- Clear and remove the obstruction and switch in the desired direction. Check the electrical connection.
____________________________________________
limit positions.
____________________________________________
Problem:
During the programming run, the drive stops short of the limit position to be programmed.
Remedy:
- For safety reasons, the drive reacts sensitively to sluggishness during the programming run, in order to prevent damage. Briefly run roller shutter DOWN and then UP until you reach the upper limit position.
____________________________________________
Problem:
Ventilation slots of the roller shutter do not close fully.
Remedy:
- Delete the limit positions (see Deleting limit positions) and then set the limit positions as per to lower point (see chapter Setting the limit positions); in this case, set the lower limit position first (lower point) followed by the upper limit position.
____________________________________________
Problem:
When opening, the drive stops short of the programmed limit position.
Remedy:
- Upper anti-freeze mechanism is activated.
- The roller shutter only opens to the upper stop once every 32 times.
- Deactivate the upper anti-freeze mechanism.
____________________________________________
* C-plug connecting cables are available in various versions and lengths and must be ordered separately.