To Becker websiteUsage recommendation
Roller shutter
Certifications
... For the user:
Dynamic torque adjustment to accommodate changes in the roller shutter element
Blockage detection in the UP direction (anti-freeze mechanism)
Upper anti-freeze mechanism with automatic shading solution length adjustment (can be additionally activated)
Sensitive obstacle detection in down direction for optimum protection of the application and the obstacle
Made in Germany - for maximum reliability and durability
Automatic increase of the pressing force with anti-lifting devices
Optimal for the 2nd escape route: Quick opening also possible in a power failure
... For installation:
Intelligent installation management permits limit position corrections
Automatic shading solution length adjustment
Limit positions status indicator (LSI) signals missing limit positions
Limit position adjustment: Automatic detection when top/bottom stop and fixed point end-positions at bottom are present
... For planning:
Supports parallel connection
Electronic limit switching
After operation in an emergency, the drive finds its limit positions again independently
C-Plug pluggable connecting cable
General product data
Item number
2010 120 176 0
GTIN
4251852902660
Designation
R12-17-E22
RRP (incl. VAT)
292,00 €
Series
E22
Sales unit
pc.
Drive diameter
Ø 45mm = R
Technical data
IP degree of protection
44
Power consump.
110 W
Colour
White (RAL 9016)
Duty cycle
S2 4 min
Mains frequency
50 Hz
Power supply (AC/DC)
Alternating current
Weight
1.76 kg
Rated current
0.5 A
Speed (load)
14 U/min
Rated voltage
230 V
Drive torque (Nm)
12 Nm
Speed (rpm)
17 U/min
Cable type
plug-in
Dimensions
Dimension L1
478.1 mm
Dimension L2
518.1 mm
Dimension L3
534.1 mm
Dimension L4
16 mm
Dimension L5
40 mm
Dimension Ø c
45 mm
Dimensional drawing
Drive adapter width from Drive adapter S60L (4930 300 466 0), when selecting a different drive adapter, the dimensions L2, L3 and L5 will change
Special features
Suitable for connection in parallel
Motor head can be overwrapped
Obstacle detection
Blockage detection in both directions
Commissioning
Reduced drive torque during installation
Limit position programming
Intelligent installation management (3x approach)
Automatic detection of anti-lifting devices
LSI - limit positions status indicator
Fly screen and freeze protection function
Upper limit position anti-freeze mechanism/shading solution length adjustment
Travel specified - can be activated/deactivated
Additional features
Soft stop upper limit position
dynamic
Drive can be operated by wired operator control
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Tubular drive overruns the limit position or stops short of the set limit position.
Remedy:
Tubular drive does not run in the right direction.
Remedy:
limit positions.
Problem:
When opening, the drive stops short of the programmed limit position.
Remedy:
Problem:
Tubular drive does not move up or down (when using the escape set).
Remedy:
Tubular drive overruns the limit position or stops short of the set limit position.
Remedy:
- Check electrical installation, remove external devices, delete limit positions and then reset limit positions.
- Repair electrical installation and re-program limit positions.
- Stops have broken off or one or several attachments are broken. Repair system; reset tubular drive, then re-program limit positions.
____________________________________________
____________________________________________
Tubular drive does not run in the right direction.
Remedy:
- Tubular drive is overheated. The tubular drive is operational again after a few minutes.
- Tubular drive is faulty (does not run even after standing still for a long period of time). Replace the tubular drive.
- Clear and remove the obstruction and switch in the desired direction. Check the electrical connection.
____________________________________________
limit positions.
____________________________________________
Problem:
When opening, the drive stops short of the programmed limit position.
Remedy:
- Upper anti-freeze mechanism is activated.
- The roller shutter only opens to the upper stop once every 32 times.
- Deactivate the upper anti-freeze mechanism.
____________________________________________
Problem:
Tubular drive does not move up or down (when using the escape set).
Remedy:
- Check that the drive adapter is assembled correctly.
Roller shutter curtain always strikes too hard in the upper limit position although it reaches the lower limit position (when using the escape set).
Remedy:
Remedy:
- Delete limit positions then reset as described in chapter "Setting and deleting the limit positions for applications that represent a second escape route".
____________________________________________
* C-plug connecting cables are available in various versions and lengths and must be ordered separately.