To Becker websiteUsage recommendation
Sun protection
With integrated solar power supply, there is no need to lay cables
Single, group or central control unit
Integrated transmission pilot lights
Control button directly on the device
Suitable for outdoor installation
Adjustable sensor foot for optimum mounting
General product data
RRP (incl. VAT)
398,00 €
GTIN
4251852908341
Series
Sensors
Item number
4033 000 029 0
Sales unit
pc.
Designation
Centronics sensor control SC561
Technical data
Battery type
9V Block 6LR61
Can be integrated into the switch frame
no
Wall bracket included
Height/depth
50 mm
Weight
0.64 kg
IP degree of protection
44
Colour
Grey
Power supply (AC/DC)
DC
Mains frequency
0 Hz
Dimensions
B x H x T: 150 x 190 x 50 mm
Type of mounting
Surface mounted
Length
190 mm
Number of channels
1
Width
150 mm
Rated voltage
5 V
Dimensional drawing
Special features
NOT compatible with
Roller shutter solar set RSS541 10 Nm
NOT compatible with
Roller shutter solar set RSS541 6 Nm
Sensor functions
Sensor values - detection
Sun
Assembly and operating instructions
Declarations of conformity
Problem:
Automatic drive commands are not executed.
Remedy:
System does not extend automatically when slide switch is set to SUN
Remedy:
The drive is not functioning. The transmission pilot light on the sensor does not light up.
Remedy:
Automatic drive commands are not executed.
Remedy:
- Set the slide switch on the manual/wall transmitter to SUN.
____________________________________________
System does not extend automatically when slide switch is set to SUN
Remedy:
- Adjust sun threshold value.
____________________________________________
The drive is not functioning. The transmission pilot light on the sensor does not light up.
Remedy:
- Energy storage system is empty. Charge the sensor up in the sun.
Problem:
The drive is not functioning. The transmission pilot light on the sensor lights up.
Remedy:
The drive is not functioning. The transmission pilot light on the sensor lights up.
Remedy:
- Reduce the distance from the receiver.
- Program the sensor into the receiver.
____________________________________________