To Becker websiteUsage recommendation
Sun protection
With integrated solar power supply, there is no need to lay cables
Single, group or central control unit
Integrated transmission pilot lights
Control button directly on the device
Suitable for outdoor installation
Adjustable sensor foot for optimum mounting
General product data
GTIN
4251852908327
Series
Sensors
Sales unit
pc.
Designation
Centronic SensorControl SC861
RRP (incl. VAT)
479,00 €
Item number
4033 000 021 0
Technical data
Colour
Grey
Height/depth
50 mm
IP degree of protection
44
Power supply (AC/DC)
DC
Mains frequency
0 Hz
Can be integrated into the switch frame
no
Length
190 mm
Battery type
9V Block 6LR61
Type of mounting
Surface mounted
Wall bracket included
Number of channels
1
Dimensions
B x H x T: 150 x 190 x 50 mm
Width
150 mm
Weight
0.722 kg
Rated voltage
5 V
Dimensional drawing
Sensor functions
Sensor values - detection
- Sun
- Wind
Assembly and operating instructions
Declarations of conformity
Problem:
Automatic drive commands are not executed.
Remedy:
System does not extend automatically when slide switch is set to SUN.
Remedy:
The drive is not functioning. The transmission pilot light on the sensor does not light up.
Remedy:
Automatic drive commands are not executed.
Remedy:
- Set the slide switch on the manual/wall transmitter to SUN.
____________________________________________
System does not extend automatically when slide switch is set to SUN.
Remedy:
- Adjust sun threshold value.
- Wind threshold value exceeded. Wait for the wind to die down.
Problem:
System does not extend manually when slide switch is set to SUN or MANUAL.
Remedy:
System does not extend manually when slide switch is set to SUN or MANUAL.
Remedy:
- Wind threshold value exceeded. Wait for the wind to die down.
____________________________________________
The drive is not functioning. The transmission pilot light on the sensor does not light up.
Remedy:
- Energy storage system is empty. Charge the sensor up in the sun.
Problem:
The drive is not functioning. The transmission pilot light on the sensor lights up.
Remedy:
The drive is not functioning. The transmission pilot light on the sensor lights up.
Remedy:
- Reduce the distance from the receiver.
- Program the sensor into the receiver.
____________________________________________