Usage recommendation
Roller shutter
Product highlights
Enables the programming of two intermediate positions
Single, group or central control unit
Enables the programming of one memory time each for the up and down direction
Integrated transmission pilot lights
Changing between manual and automatic mode possible on the operating device directly
Rear labelling field
Defined drive commands possible
General product data
Sales unit
pc.
Item number
4034 000 204 1
Series
Transmitter
RRP (incl. VAT)
156,00 €
GTIN
4251852908242
Designation
Centronic MemoryControl MC441-II
Technical data
Power supply (AC/DC)
DC
Touch mode
Dimensions
B x H x T: 39 x 123 x 21 mm
Battery type
CR 2430
Number of channels
1
Colour
Black
Width
39 mm
Can be integrated into the switch frame
no
Type of mounting
Hand-held device
IP degree of protection
20
Intermediate positions
Dependent upon receiver
Length
123 mm
Weight
0.135 kg
Wall bracket included
Height/depth
21 mm
Mains frequency
0 Hz
Rated voltage
3 V
Additional features
Intermediate positions
Dependent upon receiver
Time function
Memory
Sensor functions
Manual/automatic mode changeover
Time function
Time function
Memory
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Drive is not functioning.
Remedy:
Run times deviate from those programmed.
Remedy:
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Run times deviate from those programmed.
Remedy:
- Power failure at the drive. Reprogram switching times.
Problem:
Tubular drive does not run in a 24-hour cycle.
Remedy:
Tubular drive does not run in a 24-hour cycle.
Remedy:
- Set to AUTO using the function button
- Program run times.
____________________________________________
This may also interest you!