Usage recommendation
Roller shutter
Product highlights
Enables the programming of two intermediate positions
Single, group or central control unit
Enables the programming of one memory time each for the up and down direction
Integrated transmission pilot lights
Changing between manual and automatic mode possible on the operating device directly
Rear labelling field
Defined drive commands possible
General product data
Series
Transmitter
Designation
Centronic MemoryControl MC441-II
Item number
4034 000 204 1
GTIN
4251852908242
Sales unit
pc.
RRP (incl. VAT)
156,00 €
Technical data
Weight
0.135 kg
Dimensions
B x H x T: 39 x 123 x 21 mm
Length
123 mm
Type of mounting
Hand-held device
Power supply (AC/DC)
DC
Number of channels
1
Touch mode
Mains frequency
0 Hz
Width
39 mm
IP degree of protection
20
Wall bracket included
Can be integrated into the switch frame
no
Colour
Black
Intermediate positions
Dependent upon receiver
Battery type
CR 2430
Height/depth
21 mm
Rated voltage
3 V
Additional features
Intermediate positions
Dependent upon receiver
Time function
Memory
Sensor functions
Manual/automatic mode changeover
Time function
Time function
Memory
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Drive is not functioning.
Remedy:
Run times deviate from those programmed.
Remedy:
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Run times deviate from those programmed.
Remedy:
- Power failure at the drive. Reprogram switching times.
Problem:
Tubular drive does not run in a 24-hour cycle.
Remedy:
Tubular drive does not run in a 24-hour cycle.
Remedy:
- Set to AUTO using the function button
- Program run times.
____________________________________________
This may also interest you!