Usage recommendation
- Venetian blind/shutter
- Roller shutter
Product highlights
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Enables the programming of one memory time each for the up and down direction
Komplett mit Rahmen
Integrated transmission pilot lights
Changing between manual and automatic mode possible on the operating device directly
Can be integrated into switch ranges from many manufacturers
Defined drive commands possible
General product data
Designation
Centronic MemoControl MC411-III
GTIN
4251852900635
Item number
4034 000 050 0
Sales unit
pc.
Series
Transmitter
RRP (incl. VAT)
111,00 €
Technical data
Width
80 mm
Wall bracket included
Colour
White
Intermediate positions
Dependent upon receiver
Dimensions
B x H x T: 80 x 80 x 15 mm
Touch mode
Number of channels
1
Length
80 mm
Weight
0.144 kg
Type of mounting
Wall unit
Height/depth
15 mm
IP degree of protection
20
Battery type
CR 2430
Can be integrated into the switch frame
55x55
Mains frequency
0 Hz
Power supply (AC/DC)
DC
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Time function
Memory
Sensor functions
Manual/automatic mode changeover
Time function
Time function
Memory
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Run times deviate from those programmed.
Remedy:
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Run times deviate from those programmed.
Remedy:
- Power failure at the drive. Reprogram switching times.
Problem:
Tubular drive does not run in a 24-hour cycle.
Remedy:
Tubular drive does not run in a 24-hour cycle.
Remedy:
- Set to AUTO using the function button
- Program run times.
____________________________________________