Usage recommendation
- Roller shutter
- Sun protection
Product highlights
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Channels can be controlled independently from one another
Integrated transmission pilot lights
Rear labelling field
Defined drive commands possible
General product data
Item number
4034 000 202 0
RRP (incl. VAT)
139,00 €
GTIN
4251852908198
Series
Transmitter
Designation
Centronic EasyControl EC545-II
Sales unit
pc.
Technical data
Height/depth
21 mm
Length
123 mm
Can be integrated into the switch frame
no
Weight
0.143 kg
Type of mounting
Hand-held device
Battery type
CR 2430
Wall bracket included
IP degree of protection
20
Intermediate positions
Dependent upon receiver
Mains frequency
0 Hz
Number of channels
5
Width
39 mm
Dimensions
B x H x T: 39 x 123 x 21 mm
Colour
White
Power supply (AC/DC)
DC
Touch mode
Rated voltage
3 V
Dimensional drawing
![Dimensional drawing](https://produktcenter.becker-antriebe.com/out/media/BAPIM001/Pixelboxx/Massskizze_EC545-II.png)
Communication
Radio frequency
868,3 MHz
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Required drive is not functioning.
Remedy:
Select correct channel.
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Required drive is not functioning.
Remedy:
Select correct channel.
____________________________________________