Usage recommendation
- Sun protection
- Roller shutter
Product highlights
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Channels can be controlled independently from one another
Integrated transmission pilot lights
Easy-to-read 10-channel display with 3-colour LEDs
Rear labelling field
Defined drive commands possible
General product data
GTIN
4251852908211
Sales unit
pc.
Series
Transmitter
RRP (incl. VAT)
157,00 €
Item number
4034 000 203 0
Designation
Centronic EasyControl EC5410-II
Technical data
Mains frequency
0 Hz
Battery type
CR 2430
Can be integrated into the switch frame
no
Colour
White
Length
123 mm
Weight
0.142 kg
Touch mode
Wall bracket included
Dimensions
B x H x T: 39 x 123 x 21 mm
Width
39 mm
Number of channels
10
Power supply (AC/DC)
DC
Intermediate positions
Dependent upon receiver
Type of mounting
Hand-held device
Height/depth
21 mm
IP degree of protection
20
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Required drive is not functioning.
Remedy:
Select correct channel.
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Required drive is not functioning.
Remedy:
Select correct channel.
____________________________________________
This may also interest you!