Usage recommendation
- Sun protection
- Roller door
- Roller shutter
Product highlights
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Channels can be controlled independently from one another
Integrated transmission pilot lights
Metal ring for attachment to key ring
Defined drive commands possible
General product data
Sales unit
pc.
Item number
4034 000 226 1
Series
Transmitter
RRP (incl. VAT)
61,00 €
GTIN
4251852908297
Designation
Centronic EasyControl EC145-II
Technical data
Power supply (AC/DC)
DC
Touch mode
Dimensions
B x H x T: 34 x 64 x 11 mm
Battery type
CR 2032
Number of channels
5
Colour
Black
Width
34.5 mm
Can be integrated into the switch frame
no
Type of mounting
Hand-held device
IP degree of protection
20
Intermediate positions
Dependent upon receiver
Length
63.5 mm
Weight
0.05 kg
Height/depth
11 mm
Mains frequency
0 Hz
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Required drive is not functioning.
Remedy:
Select correct channel.
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Required drive is not functioning.
Remedy:
Select correct channel.
____________________________________________