Usage recommendation
- Sun protection
- Roller door
- Roller shutter
Product highlights
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Channels can be controlled independently from one another
Integrated transmission pilot lights
Metal ring for attachment to key ring
Defined drive commands possible
General product data
RRP (incl. VAT)
61,00 €
Sales unit
pc.
Item number
4034 000 226 1
Designation
Centronic EasyControl EC145-II
Series
Transmitter
GTIN
4251852908297
Technical data
Type of mounting
Hand-held device
Battery type
CR 2032
Width
34.5 mm
Number of channels
5
Colour
Black
Touch mode
Can be integrated into the switch frame
no
IP degree of protection
20
Power supply (AC/DC)
DC
Mains frequency
0 Hz
Length
63.5 mm
Intermediate positions
Dependent upon receiver
Height/depth
11 mm
Dimensions
B x H x T: 34 x 64 x 11 mm
Weight
0.05 kg
Rated voltage
3 V
Dimensional drawing
![Dimensional drawing](https://produktcenter.becker-antriebe.com/out/media/BAPIM001/Pixelboxx/Massskizze_EC145-II.png)
Communication
Radio frequency
868,3 MHz
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Required drive is not functioning.
Remedy:
Select correct channel.
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Required drive is not functioning.
Remedy:
Select correct channel.
____________________________________________