To Becker websiteUsage recommendation
- Sun protection
- Roller door
- Roller shutter
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Channels can be controlled independently from one another
Integrated transmission pilot lights
Metal ring for attachment to key ring
Defined drive commands possible
General product data
Designation
Centronic EasyControl EC145-II
GTIN
4251852908297
Item number
4034 000 226 1
Series
Transmitter
Sales unit
pc.
RRP (incl. VAT)
61,00 €
Technical data
Weight
0.05 kg
Colour
Black
Number of channels
5
Height/depth
11 mm
IP degree of protection
20
Can be integrated into the switch frame
no
Intermediate positions
Dependent upon receiver
Type of mounting
Hand-held device
Power supply (AC/DC)
DC
Dimensions
B x H x T: 34 x 64 x 11 mm
Width
34.5 mm
Length
63.5 mm
Mains frequency
0 Hz
Battery type
CR 2032
Touch mode
Rated voltage
3 V
Dimensional drawing
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Required drive is not functioning.
Remedy:
Select correct channel.
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Required drive is not functioning.
Remedy:
Select correct channel.
____________________________________________