To Becker websiteUsage recommendation
- Sun protection
- Venetian blind/shutter
Enables the programming of two intermediate positions
Single, group or central control unit
Settings not lost even when battery changed
Setting the threshold values possible directly on the device
Single channel assignment and group setup
Automatic creation of group and central channels
Automatic hiding of unused channels
Simple start-up by automatic selection of the nearest receiver
Mesh technology ensures the automatic networking of all devices to create a powerful network
Changing between manual and automatic mode possible on the operating device directly
Automatic battery level indicator when inserting the batteries
Multicolour display for simple status feedback and start-up
Optical operating feedback via LED animations
Defined drive commands possible
General product data
GTIN
4251852916155
Sales unit
pc.
Item number
4036 000 005 0
Designation
Centronic SunWindControl SWC541 PLUS
RRP (incl. VAT)
192,00 €
Series
Transmitter
Technical data
Can be integrated into the switch frame
no
Wall bracket included
Weight
0.237 kg
Width
40 mm
Number of channels
1
Type of mounting
Hand-held device
Battery type
AA
Touch mode
Intermediate positions
Dependent upon receiver
Length
152 mm
Dimensions
B x H x T: 40 x 152 x 25 mm
Colour
White
Power supply (AC/DC)
DC
Height/depth
25 mm
IP degree of protection
20
Mains frequency
0 Hz
Rated voltage
3 V
Dimensional drawing
Communication
Bidirectional product
Additional features
Intermediate positions
Dependent upon receiver
Sensor functions
Manual/automatic mode changeover
Sensor values - threshold settings
- Wind
- Sun
- Twilight
Assembly and operating instructions
Declarations of conformity
Problem:
Tubular drive/receiver is not responding.
Remedy:
- Insert a new battery/batteries into the hand-held transmitter.
- Make sure the battery/batteries is/are correctly inserted in the hand-held transmitter.
- Reduce distance from receiver.
- Program transmitter.
- Check the receiver.
____________________________________________
Problem:
The LED ring on the hand-held transmitter lights up red when the receiver for the setting mode is selected.
Remedy:
- Reduce distance from receiver.
- Check electr. connection of the receiver.
- Put the receiver into programming mode.
- Add the transmitter to the installation.
____________________________________________
LED ring flashes yellow or red 4 times.
Remedy:
- Insert new batteries into the transmitter.
____________________________________________
Automatic drive commands are not executed.
Remedy:
- Check whether automatic mode is active.
Problem:
System does not extend in automatic mode.
Remedy:
System does not extend in automatic mode.
Remedy:
- Adjust sun threshold value.
- Wait for the wind to die down.
Problem:
System does not extend in automatic or manual mode.
Remedy:
System does not extend in automatic or manual mode.
Remedy:
- Wind threshold value exceeded. Wait for the wind to die down.
____________________________________________