To Becker websiteUsage recommendation
Roller shutter
Enables the programming of two intermediate positions
Single, group or central control unit
Settings not lost even when battery changed
Enables the programming of one memory time each for the up and down direction
Single channel assignment and group setup
Automatic creation of group and central channels
Automatic hiding of unused channels
Simple start-up by automatic selection of the nearest receiver
Mesh technology ensures the automatic networking of all devices to create a powerful network
Changing between manual and automatic mode possible on the operating device directly
Automatic battery level indicator when inserting the batteries
Multicolour display for simple status feedback and start-up
Optical operating feedback via LED animations
Defined drive commands possible
General product data
Sales unit
pc.
Designation
Centronic EasyControl EC541 PLUS
GTIN
4251852900475
Series
Transmitter
RRP (incl. VAT)
98,00 €
Item number
4036 000 002 0
Technical data
Width
40 mm
Colour
White
Battery type
AA
Number of channels
1
Height/depth
25 mm
Can be integrated into the switch frame
no
Power supply (AC/DC)
DC
Wall bracket included
Dimensions
B x H x T: 40 x 152 x 25 mm
Mains frequency
0 Hz
Type of mounting
Hand-held device
Intermediate positions
Dependent upon receiver
Weight
0.234 kg
Length
152 mm
IP degree of protection
20
Rated voltage
3 V
Dimensional drawing
Communication
Bidirectional product
Additional features
Intermediate positions
Dependent upon receiver
Time function
Memory
Sensor functions
Manual/automatic mode changeover
Time function
Time function
Memory
Assembly and operating instructions
Declarations of conformity
Problem:
Tubular drive/receiver is not responding.
Remedy:
- Insert a new battery/batteries into the hand-held transmitter.
- Make sure the battery/batteries is/are correctly inserted in the hand-held transmitter.
- Reduce distance from receiver.
- Program transmitter.
- Check the receiver.
____________________________________________
Problem:
The LED ring on the hand-held transmitter lights up red when the receiver for the setting mode is selected.
Remedy:
- Reduce distance from receiver.
- Check electr. connection of the receiver.
- Put the receiver into programming mode.
- Add the transmitter to the installation.
____________________________________________
LED ring flashes yellow or red 4 times.
Remedy:
- Insert new batteries into the transmitter.
____________________________________________