Usage recommendation
- Roller shutter
- Sun protection
- Venetian blind/shutter
Product highlights
Enables the programming of two intermediate positions
Single, group or central control unit
Enables the programming of one memory time each for the up and down direction
Compatible with the KNX-RF radio standard
Integrated transmission pilot lights
Large illuminated display
Button for easy set-up and retrieval of up to 4 scenarios
Defined drive commands possible
Can be programmed to recognise up to 30 receivers
General product data
RRP (incl. VAT)
96,00 €
Sales unit
pc.
Item number
4035 000 001 1
Designation
B-Tronic EasyControl EC5401B
Series
Transmitter
GTIN
4251852908679
Technical data
Type of mounting
Hand-held device
Battery type
AAA
Width
33 mm
Number of channels
1
Colour
Black
Touch mode
Can be integrated into the switch frame
no
IP degree of protection
20
Power supply (AC/DC)
DC
Wall bracket included
Mains frequency
0 Hz
Length
175 mm
Intermediate positions
Dependent upon receiver
Height/depth
19 mm
Dimensions
B x H x T: 33 x 175 x 19 mm
Weight
0.2834 kg
Rated voltage
3 V
Dimensional drawing
Communication
Bidirectional product
Radio frequency
868,3 MHz
Additional features
Intermediate positions
Dependent upon receiver
Time function
Memory
Sensor functions
Manual/automatic mode changeover
Time function
Time function
Memory
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Run times deviate from those programmed.
Remedy:
Run times deviate from those programmed.
Remedy:
- Power failure at the drive. Reprogram switching times.
Problem:
Tubular drive does not run in a 24-hour cycle.
Remedy:
Tubular drive does not run in a 24-hour cycle.
Remedy:
- Set to AUTO using the function button
- Program run times.
Receiver is not responding. Receiver is not responding to the master button.
Remedy:
Problem:Remedy:
- Insert a new battery.
- Insert the battery correctly.
- Reduce distance from receiver.
- Program transmitter.
- Check the receiver.
Status LED flashes yellow.
Remedy:
Problem:Remedy:
- Insert a new battery.
Status LED flashes red for 3 seconds after actuating one of the UP/STOP/DOWN buttons.
Remedy:
Problem:Remedy:
- Check the path for an obstacle.
Status LED lights up red for 3 seconds after actuating one of the UP/STOP/DOWN buttons.
Remedy:
Remedy:
- Reduce distance from receiver.
- Check battery.
- Check the power supply at the receiver.
Problem:
Function cannot be set.
Remedy:
Function cannot be set.
Remedy:
- Check the functionality in the receiver.
____________________________________________