To Becker websiteUsage recommendation
- Roller shutter
- Sun protection
- Venetian blind/shutter
Enables the programming of two intermediate positions
Single, group or central control unit
Enables the programming of one memory time each for the up and down direction
Compatible with the KNX-RF radio standard
Integrated transmission pilot lights
Large illuminated display
Button for easy set-up and retrieval of up to 4 scenarios
Defined drive commands possible
Can be programmed to recognise up to 30 receivers
General product data
Item number
4035 000 001 1
GTIN
4251852908679
Designation
B-Tronic EasyControl EC5401B
RRP (incl. VAT)
96,00 €
Series
Transmitter
Sales unit
pc.
Technical data
Colour
Black
Touch mode
Width
33 mm
Height/depth
19 mm
Type of mounting
Hand-held device
Power supply (AC/DC)
DC
IP degree of protection
20
Can be integrated into the switch frame
no
Mains frequency
0 Hz
Dimensions
B x H x T: 33 x 175 x 19 mm
Intermediate positions
Dependent upon receiver
Weight
0.2834 kg
Number of channels
1
Battery type
AAA
Length
175 mm
Wall bracket included
Rated voltage
3 V
Dimensional drawing
Communication
Bidirectional product
Additional features
Intermediate positions
Dependent upon receiver
Time function
Memory
Sensor functions
Manual/automatic mode changeover
Time function
Time function
Memory
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Run times deviate from those programmed.
Remedy:
Run times deviate from those programmed.
Remedy:
- Power failure at the drive. Reprogram switching times.
Problem:
Tubular drive does not run in a 24-hour cycle.
Remedy:
Tubular drive does not run in a 24-hour cycle.
Remedy:
- Set to AUTO using the function button
- Program run times.
Receiver is not responding. Receiver is not responding to the master button.
Remedy:
Problem:Remedy:
- Insert a new battery.
- Insert the battery correctly.
- Reduce distance from receiver.
- Program transmitter.
- Check the receiver.
Status LED flashes yellow.
Remedy:
Problem:Remedy:
- Insert a new battery.
Status LED flashes red for 3 seconds after actuating one of the UP/STOP/DOWN buttons.
Remedy:
Problem:Remedy:
- Check the path for an obstacle.
Status LED lights up red for 3 seconds after actuating one of the UP/STOP/DOWN buttons.
Remedy:
Remedy:
- Reduce distance from receiver.
- Check battery.
- Check the power supply at the receiver.
Problem:
Function cannot be set.
Remedy:
Function cannot be set.
Remedy:
- Check the functionality in the receiver.
____________________________________________