To Becker websiteUsage recommendation
Roller shutter
Switching times not lost in the event of power failure
Daily or weekly program can be programmed
Holiday function can be activated
Shade and twilight function
Preprogrammed date, time and switching time function
Adjustable ventilation slots
Large, easy-to-read display
Changing between manual and automatic mode possible on the operating device directly
Can be fitted into any flush-mounted device socket with 58 mm diameter according to DIN EN 49073 / DIN EN 60670
General product data
Item number
4906 270 000 0
GTIN
4251852907566
Designation
Timer U26
RRP (incl. VAT)
146,00 €
Series
Control units
Sales unit
pc.
Technical data
Switching current max.
µ 5A / 230V / AC cos Φ = 1
Colour
White
Width
80 mm
Height/depth
42 mm
Type of mounting
Flush mounted
Power supply (AC/DC)
Alternating current
IP degree of protection
20
Can be integrated into the switch frame
55x55
Mains frequency
50 Hz
Dimensions
B x H x T: 80 x 80 x 42 mm
Weight
0.135 kg
Number of channels
1
Length
80 mm
Rated voltage
230 V
Special features
NOT compatible with
Surface-mounted housing V3 for EC62S/EC62P
Additional features
Time function
Timer
Sensor functions
Manual/automatic mode changeover
Window light sensor can be connected
Sensor values - threshold settings
- Sun
- Twilight
Sensor values - evaluable
- Sun
- Twilight
Time function
Time function
Timer
Holiday function
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
The roller shutter moves downwards about 15 minutes after it has been opened.
Remedy:
The roller shutter moves downwards about 15 minutes after it has been opened.
Remedy:
- Check the twilight value and the position of the sensor on the window. It may have become detached from the pane.
The switching device does not carry out the set switching commands, or does so after a delay.
Remedy:
Remedy:
- Put the time into automatic mode.
Problem:
The sun and twilight parameters that have been set cannot be changed, or are not displayed.
Remedy:
The sun and twilight parameters that have been set cannot be changed, or are not displayed.
Remedy:
- Check the sensor, the sensor cable and the connecting plug.
____________________________________________