Usage recommendation
- Sun protection
- Roller shutter
Product highlights
Single, group or central control unit
Allows CentronicPlus radio products to be operated via wired control units from other manufacturers
Mesh technology ensures the automatic networking of all devices to create a powerful network
Timers and sun protection controls can be integrated upstream
Can be fitted into any flush-mounted device socket with 58 mm diameter according to DIN EN 49073 / DIN EN 60670
Installation behind the operator control in any deep flush-mounted switch box possible
Can be combined with any switch range
Defined drive commands possible
General product data
GTIN
4251852916940
Item number
4036 000 024 0
RRP (incl. VAT)
205,00 €
Designation
Centronic VarioControl VC421 PLUS
Sales unit
pc.
Series
Transmitter
Technical data
Power supply (AC/DC)
Alternating current
Weight
0,254 kg
Can be integrated into the switch frame
no
Width
44 mm
Height/depth
20 mm
Touch mode
Mains frequency
50/60 Hz
Number of channels
1
Length
41 mm
An external switch/pushbutton can be connected
Dimensions
B x H x T: 44 x 41 x 20 mm
Intermediate positions
Dependent upon receiver
Type of mounting
Flush mounted
IP degree of protection
20
Colour
Grey
Rated voltage
110 - 240 V
Dimensional drawing
Communication
Bidirectional product
Radio frequency
868,3 MHz
Additional features
Intermediate positions
Dependent upon receiver
Assembly and operating instructions
Declarations of conformity
Miscellaneous
Problem:
Tubular drive/receiver is not responding.
Remedy:
- Insert a new battery/batteries into the hand-held transmitter.
- Make sure the battery/batteries is/are correctly inserted in the hand-held transmitter.
- Reduce distance from receiver.
- Program transmitter.
- Check the receiver.
____________________________________________
Problem:
The LED ring on the hand-held transmitter lights up red when the receiver for the setting mode is selected.
Remedy:
- Reduce distance from receiver.
- Check electr. connection of the receiver.
- Put the receiver into programming mode.
- Add the transmitter to the installation.
____________________________________________
LED ring flashes yellow or red 4 times.
Remedy:
- Insert new batteries into the transmitter.
____________________________________________