Usage recommendation
- Venetian blind/shutter
- Sun protection
Product highlights
Enables the programming of two intermediate positions per channel
Single, group or central control unit
Setting the threshold values possible directly on the device
Integrated transmission pilot lights
Automatic mode can be activated/deactivated simultaneously for individual channels or all channels on the operating device directly
Rear labelling field
Defined drive commands possible
General product data
Designation
Centronic SunWindControl SWC445-II
Item number
4033 000 214 0
RRP (incl. VAT)
247,00 €
Series
Transmitter
GTIN
4251852908105
Sales unit
pc.
Technical data
Weight
0.143 kg
Dimensions
B x H x T: 41 x 182 x 20 mm
Mains frequency
0 Hz
Colour
White
Height/depth
20 mm
Power supply (AC/DC)
DC
Width
41 mm
Type of mounting
Hand-held device
IP degree of protection
20
Number of channels
5
Length
182 mm
Can be integrated into the switch frame
no
Wall bracket included
Touch mode
Battery type
CR 2430
Intermediate positions
Dependent upon receiver
Rated voltage
3 V
Dimensional drawing
![Dimensional drawing](https://produktcenter.becker-antriebe.com/out/media/BAPIM001/Pixelboxx/Massskizze_SWC445-II.png)
Communication
Radio frequency
868,3 MHz
Additional features
Intermediate positions
Dependent upon receiver
Sensor functions
Manual/automatic mode changeover
Assembly and operating instructions
Declarations of conformity
Problem:
Drive is not functioning.
Remedy:
Automatic drive commands are not executed.
Remedy:
System does not extend automatically when slide switch is set to SUN.
Remedy:
Drive is not functioning.
Remedy:
- Insert new battery correctly.
- Reduce distance from receiver.
- Transmitter is not programmed into receiver. Program transmitter.
____________________________________________
Automatic drive commands are not executed.
Remedy:
- Set the slide switch to SUN.
- The automatic sun protection function was interrupted by a manual drive command. Move the slide switch from SUN to MANUAL and then back to SUN.
____________________________________________
System does not extend automatically when slide switch is set to SUN.
Remedy:
- Adjust sun threshold value.
- Wind threshold value exceeded. Wait for the wind to die down.
____________________________________________