As a follow-up/alternative item for this product we recommend:
Product highlights
... For the user:
Enables programming of 2 freely selectable intermediate positions
Automatic increase of the pressing force with anti-lifting devices
Made in Germany - for maximum reliability and durability
Blockage detection in the UP direction (anti-freeze mechanism)
Soft upper stop – optimum adaptation of closing forces for fabric protection
Dynamic torque adjustment to accommodate changes in the roller shutter element
Memory function: Integrated timer can be activated via MemoControl transmitter
... For installation:
Switch on the motor head to change the direction of rotation and to activate and deactivate programming mode
Limit positions status indicator (LSI) signals missing limit positions
Lower limit position adjustment: point (automatic detection or freely programmable), Upper limit position adjustment: point or stop
Automatic shading solution length adjustment
Intelligent installation management permits limit position corrections
... For planning:
Centronic radio receiver integrated: compatible with Centronic range of control units
Supports parallel connection
Integrated radio receiver compatible with the Centronic control unit range
C-Plug pluggable connecting cable
Individual, group and central control possible (also by radio)
General product data
Item number
2010 120 125 0
Series
PRF+
Drive diameter
Ø 45mm = R
Designation
R12/17C PRF+
Sales unit
pc.
Technical data
Rated current
0.5 A
Weight
1.75 kg
Rated voltage
230 V
IP degree of protection
44
Intermediate positions
2
Power supply (AC/DC)
Alternating current
Mains frequency
50 Hz
Power consump.
110 W
Speed (load)
14 U/min
Duty cycle
S2 4 min
Drive torque (Nm)
12 Nm
Speed (rpm)
17 rpm
Cable type
plug-in
Dimensional drawing
Drive adapter width from Drive adapter S40 (4930 300 083 0), when selecting a different drive adapter, the dimensions L2, L3 and L5 will change
Special features
Suitable for connection in parallel
Motor head can be overwrapped
Obstacle detection
Blockage detection in both directions
Commissioning
Reduced drive torque during installation
Limit position programming
Intelligent installation management (3x approach)
Automatic detection of anti-lifting devices
Additional features
Intermediate positions
2
Time function
Memory
Time function
Time function
Memory
Assembly and operating instructions
* C-plug connecting cables are available in various versions and lengths and must be ordered separately.