Certifications
As a follow-up/alternative item for this product we recommend:
Product highlights
... For the user:
Soft upper stop – optimum adaptation of closing forces for fabric protection
Made in Germany - for maximum reliability and durability
Automatic increase of the pressing force with anti-lifting devices
Memory function: Integrated timer can be activated via MemoControl transmitter
Blockage detection in the UP direction (anti-freeze mechanism)
Dynamic torque adjustment to accommodate changes in the roller shutter element
Enables programming of 2 freely selectable intermediate positions
... For installation:
Lower limit position adjustment: point (automatic detection or freely programmable), Upper limit position adjustment: point or stop
Automatic shading solution length adjustment
Switch on the motor head to change the direction of rotation and to activate and deactivate programming mode
Intelligent installation management permits limit position corrections
... For planning:
Individual, group and central control possible (also by radio)
Centronic radio receiver integrated: compatible with Centronic range of control units
Integrated radio receiver compatible with the Centronic control unit range
Supports parallel connection
General product data
Sales unit
pc.
Item number
2009 020 102 0
Designation
P9/16PRF+
Series
PRF+
Drive diameter
Ø 35mm = P
Technical data
Power consump.
110 W
IP degree of protection
44
Duty cycle
S2 4 min
Speed (load)
13 U/min
Power supply (AC/DC)
Alternating current
Mains frequency
50 Hz
Rated voltage
230 V
Intermediate positions
2
Colour
White (RAL 9016)
Weight
1.2 kg
Rated current
0.45 A
Drive torque (Nm)
9 Nm
Speed (rpm)
16 rpm
Cable type
Rubber - S05RN-F4G0.75 - white
Cable length
3 m
Dimensions
Dimension L1
449.5 mm
Dimension L2
466.5 mm
Dimension L3
478.5 mm
Dimension L4
12 mm
Dimension L5
17 mm
Dimension Ø c
35 mm
Dimensional drawing
Drive adapter width from Drive adapter S40 (4930 300 083 0), when selecting a different drive adapter, the dimensions L2, L3 and L5 will change
Special features
Suitable for connection in parallel
Motor head can be overwrapped
Communication
Radio compatibility
Centronic
Obstacle detection
Blockage detection in both directions
Commissioning
Reduced drive torque during installation
Limit position programming
Intelligent installation management (3x approach)
Automatic detection of anti-lifting devices
Additional features
Intermediate positions
2
Time function
Memory
Time function
Time function
Memory