To Becker websiteUsage recommendation
Roller door
Reverse travel on detection of an obstacle
Control button directly on the device
Complete with receiver and antenna
Operation of any 230 V door drives with pulse input
An additional operator control can be connected
Outdoor light can be connected
230 V light barrier can be connected
Electrical or optical safety contact edges can be connected
PW safety edges can be connected
Optional potential-free switching contact
Can be operated in UP, STOP and DOWN step sequence
Can be programmed to recognise up to 8 Centronic hand-held transmitter buttons
In plastic housing
General product data
RRP (incl. VAT)
245,00 €
Sales unit
pc.
Item number
4005 000 105 0
Designation
Beck-O-Tronic 5 Centronic
Series
BOT
GTIN
4251852900420
Technical data
Type of mounting
Surface mounted
Width
130 mm
Included in delivery
Centronic EasyControl EC241-II
Number of channels
1
Colour
Grey
Switching current max.
360 VA / 100 W
Can be integrated into the switch frame
no
IP degree of protection
20
Power supply (AC/DC)
Alternating current
Mains frequency
50 Hz
Length
155 mm
Height/depth
50 mm
Dimensions
B x H x T: 130 x 155 x 50 mm
Weight
0.591 kg
Rated voltage
230 V
Communication
Control modes
Roller shutter
Radio frequency
868,3 MHz
Assembly and operating instructions
Declarations of conformity
Declarations of conformity
Miscellaneous
Problem:
The door cannot be operated using the transmitter.
Remedy:
The door cannot be operated using the transmitter.
Remedy:
- Check the safety devices. The control unit only reacts to the transmitter if all the safety devices are active and the door moves in maintained operation.
- The LED (D) flashes when the transmitter is operated. Press the radio PRG button (A) until the LED (F) flashes green. Now press the control button (G) on the transmitter within 15 seconds.
- The LED (D) does not flash when the transmitter is operated. Program the transmitter into the radio receiver.
- Set the DIP switch (E) to OFF.
____________________________________________